Toolbox Talk: Stairs and Walkways

Stairways and walkways in all businesses can be the cause of injuries. These passageways do not typically get the maintenance they need, since they are “only” access ways and not production areas. Here are ten safety tips to help eliminate exposures at your company.

  1.  Always keep one hand free to use the handrails, both up and down the stairways.

  2.  Keep all stairs and walkways clear of debris and potentially slippery substances such as ice, snow, water, oil, or grease.

  3.  Keep passageways free of tools, equipment and other materials. Always practice good housekeeping in these non-production areas.

  4. When walkways and stairs are provided-use them. Don’t short-cut your safety to save a few steps or a few seconds. Hopping off loading docks or jumping over piping saves no time or money if you are injured and cannot work.

  5. Handrails can become loose and may need to be re-secured or replaced. Do not assume someone else will repair or report it. Immediately mention any problem to the right person, such as your supervisor, or take the time to fix it yourself.

  6. Where there are elevation changes in walkways, highlight the change so it is plainly visible. Distinguishing the change alerts those unfamiliar with the walkway to the hazard.

  7. Secure electrical cords and hoses so that they do not lie across walkways. If electrical cords must be laid across walkways, use approved cord covers whenever possible. Consider setting up a caution sign or flagging to alert individuals of cords or hoses in their path until a permanent “approved” solution can be put into place.

  8. Take small steps on wet and icy walkways. Use handholds to stabilize yourself when they are available. Asphalt and oiled surfaces can also be hazardous because rain water may produce an oil sheen and create slippery walking conditions.

Unlike some exposures, stairway hazards or slippery walkways can appear overnight. Take action to remedy the problem when you see it.

Advertisements
This entry was posted in Toolbox Talks and tagged , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s